This is an outstanding, lightweight universal electronic fuel pump with state-of-the-art design that can be used in all carburetor-equipped vehicles and also as a lift pump. In many applications, the advanced technology engineered into the Facet POSI-FLO fuel pump allows for a convenient interchange with the cube fuel pump. In addition it runs quieter, 65DB, versus the noise levels exhibited by earlier competitive solid state technologies. It is rated for 6000 hours of performance.

The Facet Posi-Flo Fuel Pump's self-priming capabilities provide up to 12 inches of fuel lift and no extended cranking is necessary to restart the engine if "out-of-fuel" conditions occur.

• Suplied as a kit comprising of a fuel pump, filter and union
• All models of the Facet Posi-Flo Fuel Pumps are compatible with petrol, diesel, biodiesel, blended alcohol fuels, and fuel additives
• Proven on thousands of original equipment applications. No electrical contacts. No bearings or diaphragms to wear out or fatigue. Lasts four to five times longer than many other electric fuel pumps
• Two-bolt installation plus the small size makes installation easy. For best results, mount the pump close to the fluid or fuel tank and below the liquid level
• When properly installed on most vehicles a constant, smooth, dependable supply of fuel under pressure is assured in the hottest weather or in high altitudes

 Specifications:

1.5-4.0 PSI (FEP04SV) Kit

• Part Number: FEP04SV
• Voltage: 12v 
• Earth: Negative 
• Pressure (PSI): 1.5-4.0
• Flow Rate (US Gallons per Hour): 25
• Thread Size: 1/8 NPT
• Union Size: 8mm
• Power Range: Up to 150BHP

4.0-6.0 PSI (FEP06SV) Kit

• Part Number: FEP06SV
• Voltage: 12v
• Earth: Negative 
• Pressure (PSI): 4.0-6.0
• Flow Rate (US Gallons per Hour): 32
• Thread Size: 1/8 NPT
• Union Size: 8mm
• Power Range: Up to 180BHP